Specifications
1. Material: Solid brass construction
2. Handle: Zinc
3. Valve: Ceramic cartridge, CUPC
4. Aerator: abs, 1.5GPM@60PSI
5. Hose: 304 Stainless steel hose
6. 100% pressure system tested
7. CUPC Approved
DESCRIPTION
• Brass construction
• Flexible supply lines with 3/8" compression fittings
• Includes Red/Blue indicators
FLOW
• Water usage is limited to these maximum flow rates as indicated by the corresponding product markings
• North America: 1.5 gpm max (5.7L/min) at 6Opsi
• California: 1.2 gpm max (4.5L/min) at 6Opsi
CARTRIDGE
• Ceramic disk cartridge
STAN DARDS
• Certified to CUPC
• Certified to AB1953
• Certified to NSF/ANSI 61
• Certified to Water sense
• ADA for lever handle
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects to the original consumer purchaser
• 5 year warranty if used in commercial installations
Notes before installation:
1. When you open the package. Please check the User Manual and Product maintenance knowledge and confirm all the parts are enough or not.
2. Before installation, please clean all the impurity and dirt inside plumbing. To avoid blocking the waterway and water wave device and impact the product function.
3. Working water pressure: 20-125psi (Including the hot and cold water pressure) Working temperature: 5-71 degree.
4. The pictures in manual is just diagrammatic drawing , if different, please based on the real product. If find difficult on installation, please contact with the professional install worker.
5. Please turn off the main water valve, if no body at home for long time.
Daily maintenance:
1. Please clean the aerator, shower, hose timely, in case the dirt block the waterway to occur the water flow decrease.
2. If water flow decrease, please check the water pressure is Ok or not. And check all connect parts and aerator whether be blocked by the dirt.
3. Please clean the faucet timely to keep the surface shining Use clean water to clean, then dry the faucet with soft cotton cloth is Ok. DO NOT clean with any abrasive cleanser, emery cloth or rough paper. DO NOT clean with any acid cleanser, polishing abrasive.
4. If need lots of clean, please do by following step:
①use clean water and soft cotton cloth to clean the dirt in the surface.
②Suggest to use the following cleaner:
Mild liquid detergent; Colorless glass cleaner, powdered detergent, without any polishing but can be soluble. Shinny cleaner not included abrasive action.
③after cleaning please clean all cleaner with clean water and dry it with cotton cloth.
④In case impact the water output, take apart the aerator, hose and shower, to clean timely.
1. Material: Solid brass construction
2. Handle: Zinc
3. Valve: Ceramic cartridge, CUPC
4. Aerator: abs, 1.5GPM@60PSI
5. Hose: 304 Stainless steel hose
6. 100% pressure system tested
7. CUPC Approved
DESCRIPTION
• Brass construction
• Flexible supply lines with 3/8" compression fittings
• Includes Red/Blue indicators
FLOW
• Water usage is limited to these maximum flow rates as indicated by the corresponding product markings
• North America: 1.5 gpm max (5.7L/min) at 6Opsi
• California: 1.2 gpm max (4.5L/min) at 6Opsi
CARTRIDGE
• Ceramic disk cartridge
STAN DARDS
• Certified to CUPC
• Certified to AB1953
• Certified to NSF/ANSI 61
• Certified to Water sense
• ADA for lever handle
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects to the original consumer purchaser
• 5 year warranty if used in commercial installations
Notes before installation:
1. When you open the package. Please check the User Manual and Product maintenance knowledge and confirm all the parts are enough or not.
2. Before installation, please clean all the impurity and dirt inside plumbing. To avoid blocking the waterway and water wave device and impact the product function.
3. Working water pressure: 20-125psi (Including the hot and cold water pressure) Working temperature: 5-71 degree.
4. The pictures in manual is just diagrammatic drawing , if different, please based on the real product. If find difficult on installation, please contact with the professional install worker.
5. Please turn off the main water valve, if no body at home for long time.
Daily maintenance:
1. Please clean the aerator, shower, hose timely, in case the dirt block the waterway to occur the water flow decrease.
2. If water flow decrease, please check the water pressure is Ok or not. And check all connect parts and aerator whether be blocked by the dirt.
3. Please clean the faucet timely to keep the surface shining Use clean water to clean, then dry the faucet with soft cotton cloth is Ok. DO NOT clean with any abrasive cleanser, emery cloth or rough paper. DO NOT clean with any acid cleanser, polishing abrasive.
4. If need lots of clean, please do by following step:
①use clean water and soft cotton cloth to clean the dirt in the surface.
②Suggest to use the following cleaner:
Mild liquid detergent; Colorless glass cleaner, powdered detergent, without any polishing but can be soluble. Shinny cleaner not included abrasive action.
③after cleaning please clean all cleaner with clean water and dry it with cotton cloth.
④In case impact the water output, take apart the aerator, hose and shower, to clean timely.