Shower Arm+Head
1. 8 inch ABS shower head, single function
2. Stainless steel shower arm, 2.0 GPM@80psi
3. Thread size: 1/2"NPT
Shower Valve
1. Two function brass pressure balance, anti-scalding with screw stop and protect box (40MM cartridge, Yizhan)
2. Stainless steel deck plate, zinc handle
3. Thread size: 1/2"NPT, Female
4. CUPC approved
Spout
1. Brass: 2.0GPM@20psi
2. Thread size: 1/2"NPT, male thread, 2.4 GPM@20psi
OPERATION
-
Lever style handle with temperature indicator on the escutcheon
-
Handle operates upward through a 23° arc. The rotation angle of temperature is 100°. Maximum hot through 50° in clockwise direction. Minimum cold through 50° in counterclockwise
-
Adjustable temperature limit stop to control maximum hot water temperature
-
Pressure balancing mechanism maintains selected discharge temperature to ±3.6°F(±2°C)
FLOW
-
Showerhead is limited to 2.5gpm(9.5 L/min) at 80psi
-
Bathtub spout is minimum to 2.4gpm(9.0 L/min) at 20psi
CARTRIDGE
-
Pressure Balance cartridge
STAN DARDS
-
Third party certified to meet ASME A112.18.1 all applicable requirements referenced therein
-
ADA for lever handle
WARRANTY
-
Lifetime limited warranty against leaks, drips and finish defects to the original consumer purchaser
-
5 year warranty if used in commercial installations
Notes before installation:
1. When you open the package. Please check the User Manual and Product maintenance knowledge and confirm all the parts are enough or not.
2. Before installation, please clean all the impurity and dirt inside plumbing. To avoid blocking the waterway and water wave device that impact the product function.
3. Working water pressure: 20-l25 psi (Including the hot and cold water pressure). Working temperature: 5-71 degree C
4. The pictures in manual is just diagrammatic drawing , if different, please based on the real product. If find difficult on installation, please contact with the professional install worker.
5. Please turn off the main water valve, if no body at home for long time.